Debug mult/div to work

it works now
This commit is contained in:
jl7719 2020-12-16 08:38:46 +00:00
parent 4ff160db1a
commit 0891f7e653
25 changed files with 146 additions and 59 deletions

View file

@ -1,6 +1,6 @@
3c05cccc
3405cccc
3c05cccc
34A5cccc
3c04aaaa
3404aaaa
3484aaaa
00851024
00000008

View file

@ -0,0 +1 @@
5

7
inputs/bgez/bgez-2.txt Normal file
View file

@ -0,0 +1,7 @@
34040003
04810003
00000000
24420001
00000000
24420005
00000008

View file

@ -1,4 +1,5 @@
3C05FFFF
3C04FFFF
00000000
04800003
00000000
00000008

View file

@ -1,4 +1,4 @@
34048000
3C048000
34050002
0085001B
00002010

View file

@ -3,5 +3,5 @@
00A00008
00000000
00000008
34020001
3402000A
00000008

View file

@ -1,4 +1,4 @@
34041003
34041001
34025678
88820003
00000008

View file

@ -2,4 +2,5 @@
34050003
00850018
00001012
00000000
00000008

View file

@ -1,3 +1,3 @@
34020003
34420005
00000008
34020005

1
inputs/ori/ori-2.ref.txt Normal file
View file

@ -0,0 +1 @@
65535

4
inputs/ori/ori-2.txt Normal file
View file

@ -0,0 +1,4 @@
3404FFFF
34052134
00851025
00000008

View file

@ -1,4 +1,4 @@
3404FFFF
3404000F
3405000B
0085102A
00000008

1
inputs/slt/slt-2.ref.txt Normal file
View file

@ -0,0 +1 @@
0

4
inputs/slt/slt-2.txt Normal file
View file

@ -0,0 +1,4 @@
3404FFFF
3405000B
0085102A
00000008

View file

@ -1,4 +1,4 @@
34040004
34040002
3C05F000
00851007
00000008

View file

@ -1,5 +1,5 @@
3404FFFF
34051008
ACA40000
ACA40004
8CA20004
00000008

1
inputs/sw/sw-2.ref.txt Normal file
View file

@ -0,0 +1 @@
65535

5
inputs/sw/sw-2.txt Normal file
View file

@ -0,0 +1,5 @@
3404FFFF
34051008
ACA4FFFC
8CA2FFFC
00000008

View file

@ -32,17 +32,17 @@ register_v0 = 8
==AND Bitwise and==
LUI $5,0xCCCC
ORI $5,$0,0xCCCC
LUI $5,0xCCCC
ORI $5,$5,0xCCCC
LUI $4,0xAAAA
ORI $4,$0,0xAAAA
ORI $4,$4,0xAAAA
AND $2,$4,$5
JR $0
3c05cccc
3405cccc
3c05cccc
34A5cccc
3c04aaaa
3404aaaa
3484aaaa
00851024
00000008
@ -104,6 +104,22 @@ JR $0
register_v0 = 1
ORI $4,$0,3
BGEZ $4,3
NOP
ADDIU $2,$2,1
NOP
ADDIU $2,$2,5
JR $0
34040003
04810003
00000000
24420001
00000000
24420005
00000008
==BGEZAL Branch on non-negative (>=0) and link==
ORI $4,$0,3
@ -176,7 +192,7 @@ NOP
ORI $2,$0,1
JR $0
3C05FFFF
3C04FFFF
04800003
00000000
00000008
@ -252,15 +268,15 @@ register_v0 = 3
==DIVU Divide unsigned== //May need other testcases for -ve/+ve, -ve/-ve
LUI $4,0x8000
LUI $4,0x8000
ORI $5,$0,2
DIVU $4,$5
MFHI $4
MFLO $5
MFLO $5
ADDU $2,$4,$5
JR $0
34048000
3C048000
34050002
0085001B
00002010
@ -343,12 +359,14 @@ NOP
ORI $2,$0,1
JR $0
3C05BFC0
34050014
00A00008
00000000
00000008
34020001
BFC00014
0,4,8,c,10,14
3C05BFC0 0
34050014 4
00A00008 8
00000000 c
00000008 10
34020001 14
00000008
register_v0 = 1
@ -472,14 +490,14 @@ register_v0 = 0x12345678
==LWL Load word left==
ORI $4,$0,0x1003
ORI $4,$0,0x1001
ORI $2,$0,0x5678
LWL $2,3($4)
JR $0
-Instruction Hex
34041003
34041001
34025678
88820003
00000008
@ -590,18 +608,26 @@ jr $0
register_v0 = 7
==ORI Bitwise or immediate==
ori $2, $0, 3
ori $2, $0, 5
ori $2, $2, 5
jr $0
34020003
00000008
34020005
34420005
register_v0 = 7
ori $4, $0, 0xFFFF
ori $5, $0, 0x1234
or $2, $4, $5
jr $0
register_v0 = 65535
==SB Store byte==
lui $4, 0x1234
@ -735,10 +761,12 @@ register_v0 = 0xFC000000
==SRAV Shift right arithmetic variable==
ori $4,$0,2
lui $5 $0,0xF000
lui $5, 0xF000
srav $2,$5,$4
jr $0
F000000 -> FC000000
34040004
3C05F000
00851007
@ -788,10 +816,10 @@ register_v0 = 2
==SW Store word==
ori $4, $0, 0xFFFF
ori $5, $0, 0x1008
sw $4, 4($5)
lw $2, 4($5)
ori $4, $0, 0xFFFF
ori $5, $0, 0x1008
sw $4, 4($5)
lw $2, 4($5)
jr $0
3404FFFF
@ -802,6 +830,20 @@ ACA40004
register_v0 = 0x0000FFFF
ori $4, $0, 0xFFFF
ori $5, $0, 0x1008
sw $4, -4($5)
lw $2, -4($5)
jr $0
3404FFFF
34051008
ACA4FFFC
8CA2FFFC
00000008
register_v0 = 0x0000FFFF
==XOR Bitwise exclusive or==
ori $4, $0, 5

View file

@ -73,8 +73,8 @@ Alu Operations:
// PAS = 5'd19, no need for PAS as it was based on faulty reasoning that speical registers Hi and Lo are in the reg file.
SLT = 5'd20,//signed compare
SLTU = 5'd21,//unsigned compare
MULU = 5'd22,//unsigned divide
DIVU = 5'd23,//unsigned multiply
MULU = 5'd22,//unsigned multiply
DIVU = 5'd23,//unsigned divide
MTHI = 5'd24,
MTLO = 5'd25
@ -168,6 +168,7 @@ end
end
LES: begin
$display("ALU A: %h B: %h", $signed(A), $signed(B));
if ($signed(A) < $signed(B)) begin
ALUCond = 1;
end
@ -225,12 +226,18 @@ end
if ($signed(A) < $signed(B)) begin
ALURes = 1;
end
else begin
ALURes = 0;
end
end
SLTU: begin
if (A < B) begin
ALURes = 1;
end
else begin
ALURes = 0;
end
end
MULU: begin
@ -240,6 +247,7 @@ end
end
DIVU: begin
$display("ALU A: %h B: %h", A, B);
temp_Lo = A / B;
temp_Hi = A % B;
end

View file

@ -9,7 +9,7 @@ module mips_cpu_control(
output logic[4:0] CtrlALUOp,
output logic[4:0] Ctrlshamt,
output logic CtrlMemWrite,
output logic CtrlALUSrc,
output logic[1:0] CtrlALUSrc,
output logic CtrlRegWrite,
output logic CtrlSpcRegWriteEn
);
@ -104,9 +104,9 @@ always @(*) begin
end else if((op==J) || (op==JAL))begin
CtrlPC = 2'd2; // Jumps within 256MB Region using 26-bit immediate in J type instruction
$display("Jump PC Ctrl");
end else if((op==SPECIAL)&&(funct==JR) || (funct==JALR))begin
end else if((op==SPECIAL)&&((funct==JR) || (funct==JALR)))begin
CtrlPC = 2'd3; // Jumps using Register.
//$display("Ctrl PC Jump Register");
$display("Ctrl PC Jump Register");
end else begin CtrlPC = 2'd0; /*/$display("Ctrl PC No Jump/Branch");*/end // No jumps or branches, just increment to next word
//CtrlMemRead and CtrlMemtoReg logic -- Interesting quirk that they have the same logic where both are concerned. Makes sense bc you'd only want to select the read data out when the memory itself is read enabled.
@ -120,12 +120,12 @@ always @(*) begin
$display("Memory read disabled");
end else if ((op==JAL) || ((op==SPECIAL)&&(funct == JALR)))begin
CtrlMemtoReg = 3'd2;//write data port of regfile is fed from PC + 8
end else if ((op==SPECIAL)&&(funct == MTHI))begin
end else if ((op==SPECIAL)&&(funct == MFHI))begin
CtrlMemtoReg = 3'd3;//write data port of regfile is fed from ALUHi
end else if ((op==SPECIAL)&&(funct == MTLO))begin
end else if ((op==SPECIAL)&&(funct == MFLO))begin
CtrlMemtoReg = 3'd4;//write data port of regfile is fed from ALULo
end else begin CtrlMemRead = 1'bx;end//Not all instructions are encompassed so, added incase for debug purposes
$display("OP: %d, Funct: %d", op, funct);
//CtrlALUOp Logic
if((op==ADDIU) || ((op==SPECIAL)&&(funct==ADDU)))begin
CtrlALUOp = 5'd0; //ADD from ALUOps
@ -146,6 +146,7 @@ always @(*) begin
CtrlALUOp = 5'd18;//NEQ from ALUOps
end else if((op==SPECIAL)&&(funct==DIV))begin
CtrlALUOp = 5'd3;//DIV from ALUOps
$display("DIV CONTROL ALUOps");
end else if((op==SPECIAL)&&(funct==DIVU))begin
CtrlALUOp = 5'd23;//DIVU from ALUOps
end else if((op==LB) || (op==LBU) || (op==LH) || (op==LHU) || (op==LW) || (op==LWL) || (op==LWR) || (op==SB) || (op==SH) || (op==SW))begin
@ -207,20 +208,24 @@ always @(*) begin
end else begin CtrlMemWrite = 0;end//default is 0 to ensure no accidental overwriting.
//CtrlSpcRegWriteEn logic
if((op==SPECIAL)&&((funct==MTHI) || (funct==MTLO)))begin
if((op==SPECIAL)&&((funct==MTHI) || (funct==MTLO) || (funct==MULT) || (funct==MULTU) || (funct==DIV) || (funct==DIVU)))begin
CtrlSpcRegWriteEn = 1;//Special register Hi and Lo are write enabled
$display("Temp being written");
end else begin CtrlSpcRegWriteEn = 0;end//default is 0 to ensure no accidental overwriting.
//CtrlALUSrc logic
if((op==ADDIU) || (op==ANDI) || (op==LUI) || (op==ORI) || (op==SLTI) || (op==SLTIU) || (op==XORI) || (op==LB) || (op==LBU) || (op==LH) || (op==LHU) || (op==LW) || (op==LWL) || (op==LWR) || (op==SB) || (op==SH) || (op==SW))begin
if((op==ADDIU) || (op==LUI) || (op==SLTI) || (op==SLTIU) || (op==LB) || (op==LBU) || (op==LH) || (op==LHU) || (op==LW) || (op==LWL) || (op==LWR) || (op==SB) || (op==SH) || (op==SW))begin
CtrlALUSrc = 1;//ALU Bus B is fed from the 16-bit immediate sign extended to 32-bit value taken from Instr[15-0]
end else if((op==BEQ) || (op==BGTZ) || (op==BLEZ) || (op==BNE) || ((op==SPECIAL)&&((funct==ADDU) || (funct==AND) || (funct==DIV) || (funct==DIVU) || (funct==MULT) || (funct==MULTU) || (funct==OR) || (funct==SLL) || (funct==SLLV) || (funct==SLT) || (funct==SLTU) || (funct==SRA) || (funct==SRAV) || (funct==SRL) || (funct==SRLV) || (funct==SUBU) || (funct==XOR))) || ((op==REGIMM)&&((rt==BGEZ) || (rt==BGEZAL) || (rt==BLTZ) || (rt==BLTZAL))))begin
CtrlALUSrc = 0;///ALU Bus B is fed from rt.
end else if ((op==ORI) || (op==ANDI) || (op==XORI)) begin
CtrlALUSrc = 2;
end else begin CtrlALUSrc = 1'bx;end
//CtrlRegWrite logic
if((op==ADDIU) || (op==ANDI) || (op==LB) || (op==LBU) || (op==LH) || (op==LHU) || (op==LUI) || (op==LW) || (op==LWL) || (op==LWR) || (op==ORI) || (op==SLTI) || (op==XORI) || ((op==SPECIAL)&&((funct==ADDU) || (funct==AND) || (funct==MFLO) || (funct==MFHI) || (funct==OR) || (funct==SLL) || (funct==SLLV) || (funct==SLT) || (funct==SLTU) || (funct==SRA) || (funct==SRAV) || (funct==SRL) || (funct==SRLV) || (funct==SUBU) || (funct==XOR)))) begin
CtrlRegWrite = 1;//The Registers are Write Enabled
$display("OPcode mflo: %h", op);
end else begin CtrlRegWrite = 0;end // The Registers are Write Disabled
end
endmodule

View file

@ -29,8 +29,8 @@ assign data_writedata = out_readdata2;
logic[31:0] out_pc_out, out_ALURes, out_readdata1, out_readdata2, in_B, in_writedata, out_ALUHi, out_ALULo;
logic[4:0] in_readreg1, in_readreg2, in_writereg, out_shamt, out_ALUOp;
logic[5:0] in_opcode;
logic out_ALUCond, out_RegWrite, out_ALUSrc, out_MemWrite, out_MemRead, out_SpcRegWriteEn;
logic[1:0] out_RegDst, out_PC;
logic out_ALUCond, out_RegWrite, out_MemWrite, out_MemRead, out_SpcRegWriteEn;
logic[1:0] out_RegDst, out_PC, out_ALUSrc;
logic[2:0] out_MemtoReg;
assign in_readreg1 = instr_readdata[25:21];
@ -72,10 +72,13 @@ always @(*) begin
//Picking which output should be taken as the second operand for ALU.
case(out_ALUSrc)
1'b1:begin
2'd2: begin
in_B = {16'd0,instr_readdata[15:0]};
end
2'd1:begin
in_B = {{16{instr_readdata[15]}},instr_readdata[15:0]};//Output from the 16-bit immediate values sign extened to 32bits.
end
1'b0:begin
2'd0:begin
in_B = out_readdata2;//Output from 'Read data 2' port of regfile.
end
endcase

View file

@ -56,7 +56,7 @@ module mips_cpu_memory(
//Synchronous write path
always_ff @(posedge clk) begin
//$display("Instruction Read: %h", instr_readdata);
//$display("Instruction: %h", instr_readdata);
//$display("RAM : INFO : data_read=%h, data_address = %h, mem=%h", data_read, data_address, memory[data_address]);
if (data_write) begin //cannot read and write to memory in the same cycle
if (instr_address != data_address) begin //cannot modify the instruction being read

View file

@ -77,7 +77,10 @@ always_ff @(negedge clk) begin
2'b11: memory[writereg][7:0] <= writedata[31:24];
endcase // readdata1[1:0]
end
default: memory[writereg] <= writedata; //most instructions
default: begin
memory[writereg] <= writedata; //most instructions
$display("Write %d in regfile", writedata);
end
endcase // opcode
end
end

View file

@ -10,12 +10,12 @@
./test/test_mips_cpu_harvard.sh rtl ori #Pass
./test/test_mips_cpu_harvard.sh rtl xor #Pass
./test/test_mips_cpu_harvard.sh rtl xori #Pass
#./test/test_mips_cpu_harvard.sh rtl div
#./test/test_mips_cpu_harvard.sh rtl divu
#./test/test_mips_cpu_harvard.sh rtl mthi
#./test/test_mips_cpu_harvard.sh rtl mtlo
#./test/test_mips_cpu_harvard.sh rtl mult
#./test/test_mips_cpu_harvard.sh rtl multu
./test/test_mips_cpu_harvard.sh rtl div #Pass
./test/test_mips_cpu_harvard.sh rtl divu #pass
./test/test_mips_cpu_harvard.sh rtl mthi #Pass
./test/test_mips_cpu_harvard.sh rtl mtlo #Pass
./test/test_mips_cpu_harvard.sh rtl mult #Pass
./test/test_mips_cpu_harvard.sh rtl multu #Pass
# branches
@ -24,7 +24,7 @@
#./test/test_mips_cpu_harvard.sh rtl bgezal #Place return address thing how??
./test/test_mips_cpu_harvard.sh rtl bgtz #Pass
./test/test_mips_cpu_harvard.sh rtl blez #Pass
#./test/test_mips_cpu_harvard.sh rtl bltz #Probably fails due to jump register thing?
./test/test_mips_cpu_harvard.sh rtl bltz #Probably fails due to jump register thing?
./test/test_mips_cpu_harvard.sh rtl bltzal #Pass
./test/test_mips_cpu_harvard.sh rtl bne #Pass