ELEC50010-IAC-CW/testbench/mips_cpu_harvard_tb.v

81 lines
2.3 KiB
Coq
Raw Normal View History

2020-12-04 14:44:48 +00:00
module mips_cpu_harvard_tb;
parameter RAM_INIT_FILE = "inputs/addiu.txt";
parameter MEM_INIT_FILE = "inputs/addiu.data.txt";
parameter TIMEOUT_CYCLES = 100;
2020-12-04 14:44:48 +00:00
logic clk, clk_enable, reset, active, data_read, data_write;
logic[31:0] register_v0, instr_address, instr_readdata, data_readdata, data_writedata, data_address;
2020-12-04 14:44:48 +00:00
mips_cpu_memory #(RAM_INIT_FILE, MEM_INIT_FILE) ramInst(
.clk(clk),
.data_address(data_address),
.data_write(data_write),
.data_read(data_read),
.data_writedata(data_writedata),
.data_readdata(data_readdata),
.instr_address(instr_address),
.instr_readdata(instr_readdata)
);
mips_cpu_harvard cpuInst(
.clk(clk),
.reset(reset),
.active(active),
.register_v0(register_v0),
.clk_enable(clk_enable),
.instr_address(instr_address),
.instr_readdata(instr_readdata),
.data_address(data_address),
.data_write(data_write),
.data_read(data_read),
.data_writedata(data_writedata),
.data_readdata(data_readdata)
);
2020-12-04 14:44:48 +00:00
// Generate clock
initial begin
$dumpfile("mips_cpu_harvard.vcd");
$dumpvars(0,mips_cpu_harvard_tb);
2020-12-04 14:44:48 +00:00
clk=0;
repeat (TIMEOUT_CYCLES) begin
#10;
clk = !clk;
#10;
clk = !clk;
end
$fatal(2, "Simulation did not finish within %d cycles.", TIMEOUT_CYCLES);
end
initial begin
$display("Initial Reset 0");
2020-12-04 14:44:48 +00:00
reset <= 0;
$display("Initial Reset 1");
2020-12-04 14:44:48 +00:00
@(posedge clk);
reset <= 1;
$display("Initial Reset 0: Start Program");
2020-12-04 14:44:48 +00:00
@(posedge clk);
reset <= 0;
@(posedge clk);
assert(active==1);
else $display("TB: CPU did not set active=1 after reset.");
2020-12-04 14:44:48 +00:00
while (active) begin
//$display("Clk: %d", clk);
2020-12-04 14:44:48 +00:00
@(posedge clk);
//$display("Register v0: %d", register_v0);
$display("Reg File Write data: %d", cpuInst.in_writedata);
2020-12-04 14:44:48 +00:00
end
@(posedge clk);
$display("TB: CPU Halt; active=0");
$display("Output:");
$display("%d",register_v0);
2020-12-04 14:44:48 +00:00
$finish;
end
endmodule