ELEC50010-IAC-CW/testbench/mips_cpu_harvard_memory.sv

module mips_cpu_harvard_memory(
    input logic clk,

    //Data Memory
    input logic[31:0] data_address,
    input logic data_write,
    input logic data_read,
    input logic[31:0] data_writedata,
    output logic[31:0] data_readdata,

    //Instruction Memory
    input logic[31:0] instr_address,
    output logic[31:0] instr_readdata

);
    parameter INSTR_INIT_FILE = "";
    parameter DATA_INIT_FILE = "";
    reg [31:0] data_memory [0:63];
    reg [31:0] instr_memory [0:63];

    initial begin
        integer i;
        //Initialise to zero by default
        for (i=0; i<$size(data_memory); i++) begin
            data_memory[i] = 0;
        end
        for (i=0; i<$size(instr_memory); i++) begin
            instr_memory[i] = 0;
        end
        //Load contents from file if specified
        if (INSTR_INIT_FILE != "") begin
            $display("RAM: Loading RAM contents from %s", INSTR_INIT_FILE);
            $readmemh(INSTR_INIT_FILE, instr_memory);
        end

        for (integer j = 0; j<$size(instr_memory); j++) begin
            $display("byte +%h: %h", 32'hBFC00000+j*4, instr_memory[j]);
        end

        if (DATA_INIT_FILE != "") begin
            $display("MEM: Loading MEM contents from %s", DATA_INIT_FILE);
            $readmemh(DATA_INIT_FILE, data_memory);
        end else begin
            $display("MEM FILE NOT GIVEN");
        end

        for (integer k = 0; k<$size(data_memory); k++) begin
            $display("byte +%h: %h", 32'h00001000+k*4, data_memory[k]);
        end
    end

    //Combinatorial read path for data and instruction.
    assign data_readdata = data_read ? data_memory[(data_address-32'h00001000)>>2] : 32'hxxxxxxxx;
    assign instr_readdata = (instr_address >= 32'hBFC00000 && instr_address < 32'hBFC00000+$size(instr_memory)) ? instr_memory[(instr_address-32'hBFC00000)>>2] : 32'hxxxxxxxx;


    //Synchronous write path
    always_ff @(posedge clk) begin
        if (data_write) begin              //cannot read and write to memory in the same cycle
            if (instr_address != data_address) begin    //cannot modify the instruction being read
                data_memory[(data_address-32'h00001000)>>2] <= data_writedata;    
            end
        end
        
    end
endmodule