mirror of
https://github.com/supleed2/ELEC50010-IAC-CW.git
synced 2024-11-10 01:35:49 +00:00
88 lines
3.5 KiB
Verilog
88 lines
3.5 KiB
Verilog
module mips_cpu_regfile(
|
|
input logic clk, //clock input for triggering write port
|
|
input logic[4:0] readreg1, //read port 1 register selector
|
|
input logic[4:0] readreg2, //read port 2 register selector
|
|
input logic[4:0] writereg, //write port register selector
|
|
input logic[31:0] writedata, //write port input data
|
|
input logic regwrite, //enable line for write port
|
|
input[5:0] opcode, //opcode input for controlling partial load weirdness
|
|
output logic[31:0] readdata1, //read port 1 output
|
|
output logic[31:0] readdata2, //read port 2 output
|
|
output logic[31:0] regv0 //debug output of $v0 or $2 (third register in file/ first register for returning function results)
|
|
);
|
|
|
|
reg[31:0] memory [31:0]; //32 register slots, 32-bits wide
|
|
|
|
initial begin
|
|
integer i; //Initialise to zero by default
|
|
for (i = 0; i < 32; i++) begin
|
|
memory[i] = 0;
|
|
end
|
|
end
|
|
|
|
assign regv0 = memory[2]; //assigning debug $v0 line to $2 of memory
|
|
|
|
assign readdata1 = memory[readreg1]; //combinatorially output register value based on read port 1 selector
|
|
assign readdata2 = memory[readreg2]; //combinatorially output register value based on read port 2 selector
|
|
|
|
always_ff @(negedge clk) begin
|
|
if (writereg == 5'b00000) begin
|
|
// skip writing if rd is $0
|
|
end else if (regwrite) begin
|
|
$display("%b", opcode);
|
|
case (opcode)
|
|
6'b100000: begin //lb, load byte
|
|
case (readdata1[1:0])
|
|
2'b00: memory[writereg] <= {{24{writedata[7]}}, writedata[7:0]};
|
|
2'b01: memory[writereg] <= {{24{writedata[15]}}, writedata[15:8]};
|
|
2'b10: memory[writereg] <= {{24{writedata[23]}}, writedata[23:16]};
|
|
2'b11: memory[writereg] <= {{24{writedata[31]}}, writedata[31:24]};
|
|
endcase // readdata1[1:0]
|
|
$display("writedata %h", writedata);
|
|
$display("memory writereg %h", memory[writereg]);
|
|
end
|
|
6'b100100: begin //lbu, load byte unsigned
|
|
case (readdata1[1:0])
|
|
2'b00: memory[writereg] <= {{24{1'b0}}, writedata[7:0]};
|
|
2'b01: memory[writereg] <= {{24{1'b0}}, writedata[15:8]};
|
|
2'b10: memory[writereg] <= {{24{1'b0}}, writedata[23:16]};
|
|
2'b11: memory[writereg] <= {{24{1'b0}}, writedata[31:24]};
|
|
endcase // readdata1[1:0]
|
|
end
|
|
6'b100001: begin //lh, load half-word
|
|
case (readdata1[1:0]) // must be half-word aligned, readdata1[0] = 0
|
|
2'b00: memory[writereg] <= {{16{writedata[15]}}, writedata[15:0]};
|
|
2'b10: memory[writereg] <= {{16{writedata[31]}}, writedata[31:16]};
|
|
endcase // readdata1[1:0]
|
|
end
|
|
6'b100101: begin //lhu, load half-word unsigned
|
|
case (readdata1[1:0]) // must be half-word aligned, readdata1[0] = 0
|
|
2'b00: memory[writereg] <= {{16{1'b0}}, writedata[15:0]};
|
|
2'b10: memory[writereg] <= {{16{1'b0}}, writedata[31:16]};
|
|
endcase // readdata1[1:0]
|
|
end
|
|
6'b100010: begin //lwl, load word left
|
|
case (readdata1[1:0])
|
|
2'b00: memory[writereg][31:24] <= writedata[7:0];
|
|
2'b01: memory[writereg][31:16] <= writedata[15:0];
|
|
2'b10: memory[writereg][31:8] <= writedata[23:0];
|
|
2'b11: memory[writereg][31:0] <= writedata[31:0];
|
|
endcase // readdata1[1:0]
|
|
end
|
|
6'b100110: begin //lwr, load word right
|
|
case (readdata1[1:0])
|
|
2'b00: memory[writereg][31:0] <= writedata[31:0];
|
|
2'b01: memory[writereg][23:0] <= writedata[31:8];
|
|
2'b10: memory[writereg][15:0] <= writedata[31:16];
|
|
2'b11: memory[writereg][7:0] <= writedata[31:24];
|
|
endcase // readdata1[1:0]
|
|
end
|
|
default: begin
|
|
memory[writereg] <= writedata; //most instructions
|
|
$display("Write %d in regfile", writedata);
|
|
end
|
|
endcase // opcode
|
|
end
|
|
end
|
|
|
|
endmodule |