Done expect for j type, LWL/R & MLT

This commit is contained in:
Ibrahim 2020-12-02 12:51:53 +00:00
parent 4edcb07e1f
commit 57d15539a2

View file

@ -1,40 +1,22 @@
/* Questions/Todos:
-how to implement mult signed vs unsigned?
-Need to clarify How many ALU ctrl flags there are
-Need to go through & check special cases for each instruction
-In the process of manually checking if every instruction has been accounted for in the actual enum
-Right what your final set of different opeators each do (easy but somewhat tedious) :(
*/
module mips_cpu_alu(
input logic[31:0] A, B,//alu_in1, alu_in2 -The two ALU inputs
input signed logic[31:0] A, B,//alu_in1, alu_in2 -The two ALU inputs
input logic [5:0] ALUFlags, //Output from ALU control - 6bits as there are 48 different instructions in our ISA that we need to implement
input logic [5:0] ALUFlags, //Output from ALU control - 6bits as there are 48 different instructions in our ISA that we need to implement
/* The ALU Flags is 6 bits for now update when reduced */
output logic ALUZero, //Is the output of the ALU 0? - used to check result
output logic ALUZero, //Is the output of the ALU 0? - used to check result
output logic[31:0] ALUOut, // The ouput of the ALU
output logic[31:0] ALUOut, // The ouput of the ALU
input [15:0] immediate;
reg [31:0] SignExtend, ZeroExtend;
input logic[10:6] shamt = instr_readdata[10:6];
);
/*
I have listed all of the instructions - reducing this set to figure out the size
of ALUFlag/enum also need to go through the IS again and find special cases
(like over/underflow) for each instruction & to note them
i.e. for the instruction SLT (set on less than):
ALUOut is '32'h000000001' if A < B
*/
// Instructions commented out have been accounted for
/* Using an enum to define constants */
@ -43,25 +25,25 @@ module mips_cpu_alu(
//ADDU = 6'd1, //Add unsigned (no overflow)
//AND = 6'd2, //Bitwise and
//ANDI = 6'd3, //Bitwise and immediate
BEQ = 6'd4, //Branch on equal
BGEZ = 6'd5, //Branch on greater than or equal to zero
BGEZAL = 6'd6, //Branch on non-negative (>=0) and link
BGTZ = 6'd7, //Branch on greater than zero
BLEZ = 6'd8, //Branch on less than or equal to zero
BLTZ = 6'd9, //Branch on less than zero
BLTZAL = 6'd10, //Branch on less than zero and link
BNE = 6'd11, //Branch on not equal
//BEQ = 6'd4, //Branch on equal
//BGEZ = 6'd5, //Branch on greater than or equal to zero
//BGEZAL = 6'd6, //Branch on non-negative (>=0) and link
//BGTZ = 6'd7, //Branch on greater than zero
//BLEZ = 6'd8, //Branch on less than or equal to zero
//BLTZ = 6'd9, //Branch on less than zero
//BLTZAL = 6'd10, //Branch on less than zero and link
//BNE = 6'd11, //Branch on not equal
//DIV = 6'd12, //Divide
//DIVU = 6'd13, //Divide unsigned
J = 6'd14, //Jump
JALR = 6'd15, //Jump and link register
JAL = 6'd16, //Jump and link
JR = 6'd17, //Jump register
LB = 6'd18, //Load byte
LBU = 6'd19, //Load byte unsigned
LH = 6'd20, //Load half-word
LHU = 6'd21, //Load half-word unsigned
LUI = 6'd22, //Load upper immediate
//LB = 6'd18, //Load byte
//LBU = 6'd19, //Load byte unsigned
//LH = 6'd20, //Load half-word
//LHU = 6'd21, //Load half-word unsigned
//LUI = 6'd22, //Load upper immediate
LW = 6'd23, //Load word
LWL = 6'd24, //Load word left
LWR = 6'd25, //Load word right
@ -71,55 +53,186 @@ module mips_cpu_alu(
//MULTU = 6'd29, //Multiply unsigned
//OR = 6'd30, //Bitwise or
//ORI = 6'd31, //Bitwise or immediate
SB = 6'd32, //Store byte
SH = 6'd33, //Store half-word
SLL = 6'd34, //Shift left logical
SLLV = 6'd35, //Shift left logical variable
SLT = 6'd36, //Set on less than (signed)
SLTI = 6'd37, //Set on less than immediate (signed)
SLTIU = 6'd38, //Set on less than immediate unsigned
SLTU = 6'd39, //Set on less than unsigned
SRA = 6'd40, //Shift right arithmetic
SRAV = 6'd41, //Shift right arithmetic
SRL = 6'd42, //Shift right logical
SRLV = 6'd43, //Shift right logical variable
//SB = 6'd32, //Store byte
//SH = 6'd33, //Store half-word
//SLL = 6'd34, //Shift left logical
//SLLV = 6'd35, //Shift left logical variable
//SLT = 6'd36, //Set on less than (signed)
//SLTI = 6'd37, //Set on less than immediate (signed)
//SLTIU = 6'd38, //Set on less than immediate unsigned
//SLTU = 6'd39, //Set on less than unsigned
//SRA = 6'd40, //Shift right arithmetic
// SRAV = 6'd41, //Shift right arithmetic
//SRL = 6'd42, //Shift right logical
//SRLV = 6'd43, //Shift right logical variable
//SUBU = 6'd44, //Subtract unsigned
SW = 6'd45, //Store word
XOR = 6'd46, //Bitwise exclusive or
XORI = 6'd47, //Bitwise exclusive or immediate
//SW = 6'd45, //Store word
//XOR = 6'd46, //Bitwise exclusive or
//XORI = 6'd47, //Bitwise exclusive or immediate
//} ALUFlags;
/* This is how I believe our ctrl flags should be arranged */
typedef enum logic [/* ? */ : 0]{
ADD =
SUB =
MULT =
DIV =
//logical
AND = 'd
OR = 'd
SLL = 'd
typedef enum logic [6:0]{
} ALUFlags;
always @(alu_in1, alu_in2, ALUFlags)
begin
SignExtend = {{16{immediate[15]}}, immediate};
ZeroExtend = {{16{1'b0}}, immediate};
case(ALUFlags)
ADD: begin
ALUOut = A & B; // is it = or <= ??
ALUOut = A + B; // is it = or <= ??
end
SUB: begin
ALUOut = A - B;
end
MULT: begin
ALUOut = A * B;
end
DIV: begin
ALUOut = A / B;
end
XOR: begin
ALUOut = A^B;
end
OR: begin
ALUOut = A | B;
end
SLL: begin
ALUOut = b >> shamt //Shamt is instruction read data [10:6]
ALUOut = B << shamt //Shamt is instruction read data [10:6]
end
SRL: begin
ALUOut = B >> shamt //Shamt is instruction read data [10:6]
end
SLLV: begin
ALUOut = B << A
end
SRLV: begin
ALUOut = B >> A
end
AND: begin
ALUOut = A & B;
end
BEQ: begin
if A = B begin
ALUOut = 0;
end
else begin
ALUOut;
end
end
BGEZ: begin
if A>=0 begin
ALUOut = 0;
end
else begin
ALUOut;
end
end
BGEZAL: begin
if A>=0 begin
ALUOut = 0;
end
else begin
ALUOut;
end
end
BGTZ: begin
if A>0 begin
ALUOut = 0;
end
else begin
AlUOut;
end
end
BLEZ: begin
if A<=0 begin
ALUOut = 0;
end
else begin
AlUOut;
end
end
BNE: begin
if A<=0 begin
ALUOut = 0;
end
else begin
AlUOut;
end
end
LB: begin
ALUOut = A + SignExtend
end
LBU: begin
ALUOut = A + ZeroExtend
end
LH: begin
ALUOut = A + SignExtend
end
LHU: begin
ALUOut = A + ZeroExtend
end
LUI: begin
ALUOut = {immediate, {16{1'b0}}};
end
SB: begin
ALUOut = A + SignExtend
end
SH: begin
ALUOut = A + SignExtend
end
SLT: begin
ALUOut = $signed(A) < $signed(B) ? 1 : 0;
end
SLTU: begin
ALUOut = A < B ? 1 : 0;
end
SRA: begin
ALUOut = $signed($signed(B) >>> shamt);
end
SRAV: begin
ALUOut = $signed($signed(B) >>> A);
end
SW: begin
ALUOut = A + SignExtend
end
end