Added a very basic test sketch to test components on breadboard before first draft of main sketch.

This commit is contained in:
jc4419 2021-05-29 02:04:04 +04:00
parent 29d1ace16b
commit 7478a4b0db

38
Command/main/main.ino Normal file
View file

@ -0,0 +1,38 @@
const int potPin = 27;
const int butPin = 16;
const int U_Led = 14;
const int L_Led = 12;
const int R_Led = 15;
const int D_Led = 13;
int potVal = 0;
bool butState = 0;
void setup() {
// put your setup code here, to run once:
Serial.begin(115200);
pinMode(U_Led, OUTPUT);
pinMode(L_Led, OUTPUT);
pinMode(R_Led, OUTPUT);
pinMode(D_Led, OUTPUT);
pinMode(butPin, INPUT_PULLUP);
}
void loop() {
// put your main code here, to run repeatedly:
//potVal = analogRead(potPin);
//Serial.println(potVal);
butState = digitalRead(butPin);
if (butState == LOW) {
// turn LED on:
digitalWrite(U_Led, HIGH);
digitalWrite(L_Led, HIGH);
digitalWrite(R_Led, HIGH);
digitalWrite(D_Led, HIGH);
} else {
// turn LED off:
digitalWrite(U_Led, LOW);
digitalWrite(L_Led, LOW);
digitalWrite(R_Led, LOW);
digitalWrite(D_Led, LOW);
}
delay(20);
}