// megafunction wizard: %RAM: 1-PORT%
// GENERATION: STANDARD
// VERSION: WM1.0
// MODULE: altsyncram 

// ============================================================
// File Name: ram_instr.v
// Megafunction Name(s):
// 			altsyncram
//
// Simulation Library Files(s):
// 			altera_mf
// ============================================================
// ************************************************************
// THIS IS A WIZARD-GENERATED FILE. DO NOT EDIT THIS FILE!
//
// 18.1.0 Build 625 09/12/2018 SJ Standard Edition
// ************************************************************


//Copyright (C) 2018  Intel Corporation. All rights reserved.
//Your use of Intel Corporation's design tools, logic functions 
//and other software and tools, and its AMPP partner logic 
//functions, and any output files from any of the foregoing 
//(including device programming or simulation files), and any 
//associated documentation or information are expressly subject 
//to the terms and conditions of the Intel Program License 
//Subscription Agreement, the Intel Quartus Prime License Agreement,
//the Intel FPGA IP License Agreement, or other applicable license
//agreement, including, without limitation, that your use is for
//the sole purpose of programming logic devices manufactured by
//Intel and sold by Intel or its authorized distributors.  Please
//refer to the applicable agreement for further details.


// synopsys translate_off
`timescale 1 ps / 1 ps
// synopsys translate_on
module ram_instr (
	address,
	clken,
	clock,
	data,
	wren,
	q);

	input	[10:0]  address;
	input	  clken;
	input	  clock;
	input	[15:0]  data;
	input	  wren;
	output	[15:0]  q;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_off
`endif
	tri1	  clken;
	tri1	  clock;
`ifndef ALTERA_RESERVED_QIS
// synopsys translate_on
`endif

	wire [15:0] sub_wire0;
	wire [15:0] q = sub_wire0[15:0];

	altsyncram	altsyncram_component (
				.address_a (address),
				.clock0 (clock),
				.clocken0 (clken),
				.data_a (data),
				.wren_a (wren),
				.q_a (sub_wire0),
				.aclr0 (1'b0),
				.aclr1 (1'b0),
				.address_b (1'b1),
				.addressstall_a (1'b0),
				.addressstall_b (1'b0),
				.byteena_a (1'b1),
				.byteena_b (1'b1),
				.clock1 (1'b1),
				.clocken1 (1'b1),
				.clocken2 (1'b1),
				.clocken3 (1'b1),
				.data_b (1'b1),
				.eccstatus (),
				.q_b (),
				.rden_a (1'b1),
				.rden_b (1'b1),
				.wren_b (1'b0));
	defparam
		altsyncram_component.clock_enable_input_a = "NORMAL",
		altsyncram_component.clock_enable_output_a = "BYPASS",
		altsyncram_component.intended_device_family = "Cyclone IV E",
		altsyncram_component.lpm_hint = "ENABLE_RUNTIME_MOD=NO",
		altsyncram_component.lpm_type = "altsyncram",
		altsyncram_component.numwords_a = 2048,
		altsyncram_component.operation_mode = "SINGLE_PORT",
		altsyncram_component.outdata_aclr_a = "NONE",
		altsyncram_component.outdata_reg_a = "UNREGISTERED",
		altsyncram_component.power_up_uninitialized = "FALSE",
		altsyncram_component.read_during_write_mode_port_a = "NEW_DATA_NO_NBE_READ",
		altsyncram_component.widthad_a = 11,
		altsyncram_component.width_a = 16,
		altsyncram_component.width_byteena_a = 1;


endmodule

// ============================================================
// CNX file retrieval info
// ============================================================
// Retrieval info: PRIVATE: ADDRESSSTALL_A NUMERIC "0"
// Retrieval info: PRIVATE: AclrAddr NUMERIC "0"
// Retrieval info: PRIVATE: AclrByte NUMERIC "0"
// Retrieval info: PRIVATE: AclrData NUMERIC "0"
// Retrieval info: PRIVATE: AclrOutput NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_ENABLE NUMERIC "0"
// Retrieval info: PRIVATE: BYTE_SIZE NUMERIC "8"
// Retrieval info: PRIVATE: BlankMemory NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_INPUT_A NUMERIC "1"
// Retrieval info: PRIVATE: CLOCK_ENABLE_OUTPUT_A NUMERIC "0"
// Retrieval info: PRIVATE: Clken NUMERIC "1"
// Retrieval info: PRIVATE: DataBusSeparated NUMERIC "1"
// Retrieval info: PRIVATE: IMPLEMENT_IN_LES NUMERIC "0"
// Retrieval info: PRIVATE: INIT_FILE_LAYOUT STRING "PORT_A"
// Retrieval info: PRIVATE: INIT_TO_SIM_X NUMERIC "0"
// Retrieval info: PRIVATE: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: PRIVATE: JTAG_ENABLED NUMERIC "0"
// Retrieval info: PRIVATE: JTAG_ID STRING "NONE"
// Retrieval info: PRIVATE: MAXIMUM_DEPTH NUMERIC "0"
// Retrieval info: PRIVATE: MIFfilename STRING ""
// Retrieval info: PRIVATE: NUMWORDS_A NUMERIC "2048"
// Retrieval info: PRIVATE: RAM_BLOCK_TYPE NUMERIC "0"
// Retrieval info: PRIVATE: READ_DURING_WRITE_MODE_PORT_A NUMERIC "3"
// Retrieval info: PRIVATE: RegAddr NUMERIC "1"
// Retrieval info: PRIVATE: RegData NUMERIC "1"
// Retrieval info: PRIVATE: RegOutput NUMERIC "0"
// Retrieval info: PRIVATE: SYNTH_WRAPPER_GEN_POSTFIX STRING "0"
// Retrieval info: PRIVATE: SingleClock NUMERIC "1"
// Retrieval info: PRIVATE: UseDQRAM NUMERIC "1"
// Retrieval info: PRIVATE: WRCONTROL_ACLR_A NUMERIC "0"
// Retrieval info: PRIVATE: WidthAddr NUMERIC "11"
// Retrieval info: PRIVATE: WidthData NUMERIC "16"
// Retrieval info: PRIVATE: rden NUMERIC "0"
// Retrieval info: LIBRARY: altera_mf altera_mf.altera_mf_components.all
// Retrieval info: CONSTANT: CLOCK_ENABLE_INPUT_A STRING "NORMAL"
// Retrieval info: CONSTANT: CLOCK_ENABLE_OUTPUT_A STRING "BYPASS"
// Retrieval info: CONSTANT: INTENDED_DEVICE_FAMILY STRING "Cyclone IV E"
// Retrieval info: CONSTANT: LPM_HINT STRING "ENABLE_RUNTIME_MOD=NO"
// Retrieval info: CONSTANT: LPM_TYPE STRING "altsyncram"
// Retrieval info: CONSTANT: NUMWORDS_A NUMERIC "2048"
// Retrieval info: CONSTANT: OPERATION_MODE STRING "SINGLE_PORT"
// Retrieval info: CONSTANT: OUTDATA_ACLR_A STRING "NONE"
// Retrieval info: CONSTANT: OUTDATA_REG_A STRING "UNREGISTERED"
// Retrieval info: CONSTANT: POWER_UP_UNINITIALIZED STRING "FALSE"
// Retrieval info: CONSTANT: READ_DURING_WRITE_MODE_PORT_A STRING "NEW_DATA_NO_NBE_READ"
// Retrieval info: CONSTANT: WIDTHAD_A NUMERIC "11"
// Retrieval info: CONSTANT: WIDTH_A NUMERIC "16"
// Retrieval info: CONSTANT: WIDTH_BYTEENA_A NUMERIC "1"
// Retrieval info: USED_PORT: address 0 0 11 0 INPUT NODEFVAL "address[10..0]"
// Retrieval info: USED_PORT: clken 0 0 0 0 INPUT VCC "clken"
// Retrieval info: USED_PORT: clock 0 0 0 0 INPUT VCC "clock"
// Retrieval info: USED_PORT: data 0 0 16 0 INPUT NODEFVAL "data[15..0]"
// Retrieval info: USED_PORT: q 0 0 16 0 OUTPUT NODEFVAL "q[15..0]"
// Retrieval info: USED_PORT: wren 0 0 0 0 INPUT NODEFVAL "wren"
// Retrieval info: CONNECT: @address_a 0 0 11 0 address 0 0 11 0
// Retrieval info: CONNECT: @clock0 0 0 0 0 clock 0 0 0 0
// Retrieval info: CONNECT: @clocken0 0 0 0 0 clken 0 0 0 0
// Retrieval info: CONNECT: @data_a 0 0 16 0 data 0 0 16 0
// Retrieval info: CONNECT: @wren_a 0 0 0 0 wren 0 0 0 0
// Retrieval info: CONNECT: q 0 0 16 0 @q_a 0 0 16 0
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr.v TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr.inc FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr.cmp FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr.bsf TRUE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr_inst.v FALSE
// Retrieval info: GEN_FILE: TYPE_NORMAL ram_instr_bb.v FALSE
// Retrieval info: LIB_FILE: altera_mf